1. Parking place. Best placed in the warehouse, but do not put together with chemical fertilizers, pesticides, so as not to corrode the parts; If it is parked outdoors, it should choose a high, dry and ventilated place, and cover it with plastic cloth to prevent mechanical damage and corrosion.
2. Cushion parts. The tractor with wooden pier or masonry pad, in order to reduce the load of the tire; If there is no support pad, the tire should increase the inflating capacity by 10% ~ 20%, and should be checked regularly, often inflated, and not lack of air.
3. Rinse thoroughly. Remove the dirt and oil on the surface of the tractor, check, adjust and tighten all parts and screws to avoid loosening and falling off.
4. Drain off the oil and water. After the tractor is out of service, the cooling water, diesel oil and oil in the engine should be put clean.
5. Maintenance parts. Take an appropriate amount of dehydrator oil (heat the oil to about 130℃) and pour it into the intake pipe. Turn the crankshaft to make the oil adhere to the piston, piston rod, cylinder liner and valve. And the piston is shaken to the compression top dead center, in order to avoid the valve spring, push rod and other parts of the pressure for a long time and lose its performance.
