1. When the first four valves work, the last four valves shall not work at the same time. In driving or operation, in addition to the driver's room, excavating any place of the loader are strictly prohibited to take or stand personnel.
2. The general mining loader system uses wheeled tractor as the main engine, before and after the loading and digging device, respectively, so that the mechanical length and weight increase above, therefore, to avoid high speed or sharp turn in driving, in order to prevent accidents. Don't glide in neutral when going downhill. When the hydraulic piston rod of the bucket and bucket handle keeps the fully extended position, it can make the bucket close to the moving arm, and the digging device is in the shortest state, which is conducive to driving. When driving, the leg should be fully recovered, the excavating device should be fixed firmly, the loading device should be lowered, the bucket and the bucket handle hydraulic piston rod should maintain a fully extended position.
3. Wheeled tractor refit into excavating loader, machine weight increases a lot, in order to reduce the damage of the tire in the case of heavy load, take the rear wheel off the ground when parking. When the parking time is more than, should support the legs, so that the rear wheel off the ground; When parking time exceeds, the rear wheel should be off the ground, and should be supported by a pad under the rear suspension.
