During the operation of the pellet machine, the machine should be maintained regularly to make the machine work normally, and the power system of the machine should also be protected and maintained regularly to avoid the occurrence of failures and ensure the smooth operation of the machine. So how should the pellet machine be maintained? ?
1. Regularly check the parts, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other moving parts are flexible and worn. If defects are found, they should be repaired in time, and must not be used forcibly.
2. The pellet machine should be used in a dry and clean room, and should not be used in places where the air contains acid and other corrosive gases.
3. When the machine is in use or stopped, the drum should be taken out for cleaning, brushed off the remaining powder in the barrel, and then installed correctly to prepare for the next use.
4. If the machine stops for a long time, the entire body of the machine must be wiped clean, and the smooth surface of the machine parts should be coated with anti-rust oil and covered with a cloth.